Hey guys, I got a problem with the Crossfire Missions, specifically Mission 24: Crossfire Chapter 5. When I get to the Coalition systems and are attacked by the Coalition Fleet, when I defeat them the game doesn't advance to the next level, it just stays on Coalition Ships Approaching. Sorry if this has been asked before, but please help me, wana keep playing this great mod! Thanks
Crossfire 1.9 troubles reports
- Martind Forlon (SA_Forlon)
- Closed
- Thread is marked as Resolved.
There are 371 replies in this Thread. The last Post () by SWAT_OP-R8R.
-
-
Bishop
That topic is solved here:
Single Player Mission 24 - Coalition problemIn short, it's meant so you get damaged while battling them so Juni gives a call of retreat, so who use "godmode" cheat, or run away to hide, or with a good enough ship and equipment to not get their hull damaged(or keep pressing the repair buttons), will have that problem.
OP already stated he may add a timer for to continue that mission, so you will have to retreat even if you can kill them all.
-
-
hello,
sorry to bother again but I didn't get an answer:
bought a Retribution class battleship (one of the new 1.9 ships I think)
ship cost 40million
ship resell: 325.000$
ship is fully repaired
is it correct?
A 10million ship I resold at around 3.2 million
thanks,
bye -
it is correct the way it is
-
Ok, I have finished the storyline and I am shocked by the ending.
Bishop That topic is solved here: Single Player Mission 24 - Coalition problem In short, it's meant so you get damaged while battling them so Juni gives a call of retreat, so who use "godmode" cheat, or run away to hide, or with a good enough ship and equipment to not get their hull damaged(or keep pressing the repair buttons), will have that problem. OP already stated he may add a timer for to continue that mission, so you will have to retreat even if you can kill them all.
Really? Well Juni still screamed out "retreat" even when my hull wasn't even scratched. Ok,I don't know if this bug/glitch/extra help happened to anyone else but..
After the Crossfire battle in X, I went to Nephele to get the datadisk, but I noticed a whole fleet followed me through the jump gate but it did not follow me, but can shoot at hostiles and move towards hostiles. After this every time (sometimes) I go through a jump hole that same fleets follows me through, this happens every time up until the coalition incident where Juni gives the order to retreat. Look at the pictures and you should get the picture
so...is anyone else getting this?
-
unlikely... i have never created such a fleet
-
OP you havent answered me yet: pls tell me, what was wrong with Chaos_Damage and why is he now flying Razorback? And what caused the problem with my account? id like to know that pls
-
Well OP, the same thing happens to me, that fleet is spawning on each gate. I think it's since after the Nomad Strike carrier getitng destroyed, as it crashed, I reloaded from manual save and it worked.
That fleet includes Juni and King, I seen Orillion too, when I'm with the real Juni, there are 2 of them, one is neutral to me(the fleet's one)
-
-
Hello!
At first sorry for my english, I'm Hungarian.I have the same problem, in the Sol system I killed the Nomad Strike Carrier and the game says "Well Done". After that, the game crashes with C++ Runtime Error.
I tried what admins advised to load a mission save intstead of autosave but it dont worked.
Please help me!HBenceHUN
-
-
Thanks the help it worked!
But unfortunately i have another problem.
The mission where i have to escort a convoy from Dublin to Sol.
My objective is to enter formation with the convoy. Everything were alright but after the Hessians attack i have to rejoin to formation then go to Earth by that trade line thing. I join the formation but it just circling around the lane, not dock in. I tried to dock manually, i was sucsessfull but the convoy dont followed me. So i cant go to Earth with the convoy.
Sorry again for bad english.
Please help me! -
um.....i made a new charr named [UR]Grand's_hauler
i left manhatan and looked around then i loged off (back to main menu) and when i went to log on the server again it crashed the server........and it was a 3 min old charr......
and it is my 9'th charracter.......maybe i should stay with 8 untill someone can tell me what causes this bug
plz delete that charr
-
Thanks the help it worked!
But unfortunately i have another problem.
The mission where i have to escort a convoy from Dublin to Sol.
My objective is to enter formation with the convoy. Everything were alright but after the Hessians attack i have to rejoin to formation then go to Earth by that trade line thing. I join the formation but it just circling around the lane, not dock in. I tried to dock manually, i was sucsessfull but the convoy dont followed me. So i cant go to Earth with the convoy.
Sorry again for bad english.
Please help me!Hello HBen,
looks that you are lucky as I but this thing is solvable. Try this ... when you are in Sol and enter formation with Trains (before attack) ..do not touch anything, wait until is convoy attacked and you receive order to engage enemies ... patience is key here. Then QUICKLY kill attackers, rejoin formation and again not touch controls and send some prayers to gods and with little luck will convoy dock . We tested this problem with OP using even my last autosave but for him it worked and for me no ... unless I used above mentioned "tactics". Hope it help also you. GL .
-
This is what i got after playing Crossfire for a few days.
I've got windows 7 32 and the mod's graphic settings are on defaul which means advanced shaders and graphics
Any ideas please ? I would be gratefull for any tip. -
Hello Cherius,
1) This look exactly as problems with used adv.shaders setting. I suggest use basic "active" or switched off (if you have active as default, switch them off ... you will need clean installation .... but first try*** ). Those setting worked differently for ppl depends about theirs HW.
1a) ... what is your GK? ... if some looow end, then you might have problem with high quality textures and you will need use compatibility mode in mod activation process.
2) And about hud ... try use one step lower resolution, when I played on widescreen LCD it helped me solve similar thing.
***
Quote from HuorDepends on how you have chosen in the activation process. You can turn off the ENBs in the enbseries.ini by default.
If you set the value to 0 then you have to activate the ENB with SHIFT + F12. If its active with 1 then you deactivate the ENB with SHIFT + F12. Both is working in toggeling mode - so SHIFT + F12 activates and deactivates the ENB based on its current state. By default i assume the ENB is activated. So with the first SHUFT + F12 you deactivate it
-
about that? have anyone ever made the Adv.shader work?
i have a good pc config (GTX 580) and with Adv.shader everything looked blury...
i mean how much power do one need to make it work better than the normal shaders....
-
It's a Geforge GT 320 M. But as i said before it went fine for a few days.
-
Did a clean install, disabled the improved shaders, lights.THe problem remains.Any other ideas ? =(((