-New feature in Versions
7.3.X.
ACPI tables could be read out. These contain temperature and power consumption
which could be made visable. The feature is mostly for notebook users as the ACPI tables are
normally not filled out in destop mainboards.
-S.M.A.R.T.
The Self Monitoring
And Reporting Technology enables you to see the harddisk parameters. It includes a
temperature readout of the harddisk. Until now only normal harddisks are supported. RAID and
SCSI systems are not yet supported due to a missing microsoft driver extension. But there
are no programs that support RAID / SCSI systems on the market...
-Change the
FrontSideBus
With this option you can vary the CPU frequency. Many mainbords support
setting the FrontSideBus via SMBus. It is for these motherboards I have added this feature.
It is for experienced users only and only at your own risk! Details
-Shutdown by
simple keystroke
You can shutdown the PC with a single key combination. That makes it
easier to end the session. You find this item under Options -> Windows
Shudown
-MONITORING Temperature, fan speed, voltages for many
motherboards.
The program displays all units, connected to an I2C Bus. It works with
all chipset from Intel, ALI, VIA, AMD, and SIS motherboards. You can see the temperature,
voltage and fan values of your motherboard chipset, inclusive dial-up adapter display and
processor parameters. From Notebooks you can see the ACPI Temps and from NVidia Grafic cards
you can look at the temps of the grafic processor and the fan speed. ATI will come soon
hopefully.
-CPU Cooling under Windows 95 / 98 / NT / 2000 (Watch Wintop !) There's
No way to switch it off! After registering you can get a small *.VXD (6K Byte) for cooling
only. It works so far for all non Athlon processors and for Athlon based system with a
VIA8363 and AMD760 chipset.
Benifits: There is No need to turn it on or off, No
overhead (CPU Time / Memory) Cooling only, and if you wish to stop using it, you simply
remove it from your system! All you have to do to receive it is to register and send the
file you could generate by Help -> CPUCooL Info -> Write to file to the author at
-CPU Optimization (AMD, Cyrix and Intel only 
)
This is the first and only program that optimizes AMD / Cyrix CPU's complete and
correct. All the other tools have bugs which I have detected when implementing my
optimizations. This feature is mostly for older cpus (AMD K6, Cypress)
-Memory
optimization (mostly for Windows 95 / 98)
Reads out the values programmed in the
E2PROM of the SDRAM's.Every value is decoded inclusive the SDRAM manufacturer if
available.
The only difference between the shareware and the registrable version is
that you can save the settings in the registrable version and you will not see the shareware
reminders any longer.
Size:976 Kb
