In this article i'll show you two representatives of two common ways to replace Hi-Fi systems. I had access to both of them.
Part 1
First representative is combined Hi-Fi components from Sony. Its really good option to assemble your own Hi-Fi system with components you like. Its featuring
1) 2x 3 Way, 3 Driver Floor-Standing Speaker SS-MF550H
1" Nano-Fine® Balanced Dome Tweeter
150W Maximum Input Power
Frequency Range 45Hz - 50kHz
Screw Type Binding Posts
3 Way, 3 Driver Floor-Standing Speaker
8" Improved H.O.P. Cone - Bass Driver
3 1/4" Improved H.O.P. Cone - Mid Driver
Sensitivity - 88 dB
Dimensions: Approx. 9.5" x 33.4" x 10" (240 x 850 x 255 mm)
2) Sony A/V Receiver STR-DE197 (amplifier)
- Frequency Range - 40Hz - 20kHz, THD 0.09%
- two stereo channels; can work seperated; each 2x 100W
- manual equilizer
- tuner
3) Chaintech ENVY 24PT sound card
PCI 2.2 I/F with bus mastering and burst modes
24-bit resolution audio format support
Sampling rates up to 192KHz
Supports Mic In / Line In / 4 Line outs & Digital Optical output
2 separate CD audio stereo inputs
Second representative is from Creative:
Speaker Power: 8 Watts RMS per channel (6 channels),
----------------- 20 Watts RMS center speaker,
----------------- 24 Watts RMS subwoofer
Frequency Response: 40Hz ~ 20kHz
Signal-to-Noise Ratio (SNR): 80dB
Satellite Speaker: 9.5cm x 7.7cm x 14cm
Satellite Speaker (with tweeter): 9.5cm x 7.7cm x 16.8cm
Center Satellite Speaker: 16.8cm x 7.7cm x 12.0cm
Subwoofer: 19.2cm x 30.0cm x 28.3cm
Wired Remote Control: 8.2cm x 4.0cm x 2.1cm
+ custom made ~80cm high stands for most of the satelites
2) Sound Blaster Creative XtremeMusic
- gold plated
Technical Specs
24-bit Analog-to-Digital conversion of analog inputs: 96kHz sampling rate
24-bit Digital-to-Analog conversion of digital sources: 96khz to analog 7.1 speaker output
24-bit Digital-to-Analog conversion of stereo digital sources: 192kHz to stereo output
16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
ASIO 2.0 support: 16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz, 24-bit/48kHz and 24-bit/96kHz with direct monitoring
Enhanced SoundFont support: Up to 24-bit resolution
Audio Performance (Rated Output @ 2Vrms, Typical Value)
Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted): Stereo Output: 109dB
Front and Rear Channels: 109dB
Center, Subwoofer and Side Channels: 109dB
Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter): 0.004%
Frequency Response (-3dB, 24-bit/96kHz input <10Hz to 46kHz
Frequency Response (-3dB, 24-bit/192kHz input): <10Hz to 88kHz (Stereo only)