Search Results

My computer run just fine with 1920x1080 - which resolution do you use ?

Can u plz upload picture from GPU-Z and the line u entered from flconfigdatabase.txt ?

that is the correct data. Last one I can think of is your PerfOptions.ini ( \Documents\My Games\Freelancer ) and the last info should be like this: [Display]size= 1920, 1080color_bpp= 32depth_bpp= 24

Dunno what the problem is, but your resolution in General section should be 1920 x 1080 x 32 so i can only guess at- u have used msconfig to alter upstart- u have some dx error - use dxdiag to verify that - u have a disk error- u have activated Stereoskopic 3D in Nvidia panel- u have made a real bad 3D profile for Freelancer.exe (Nvidia Panel)- u have altered Freelancer shortcut compability from Windows XP SP3, deactivate visual themes, deactivate desktop... and Run as Administrator- u did put …

Do u have another decent graphics card to try with from old machine ? CF does not require much. Pando: look at this index.php?page=Thread&postID=318833&highlight=Pando#post318833 and get rid of it. Are u OC'ing the MOBO ? Carefull with the pci-bus clock rate !!

Download seems fine. I just noticed the GPU-Z says PCI-E 2.0 x16 @ ... - u did place it in one of the four red slots PCI-E 3.0 - right ?? ASUS - RAMPAGE IV EXTREME Or try another "red" slot

Last thing I can think of is your Windows resolution. It should be 1920 x 1080, true colours and 32bit - is it ?

sry, but I have no idea how to test high-res textures. GPU-Z has a Render test next to Bus Interface, the ?-mark, maybe that is helpfull in some way.I do recommend a reinstall of the graphics driver - use the advanced option and use "Perform a clean install" option.Otherwise I am also convinced about a hardware error, but don't known how test it.

PSU specs. are fine ?Minimum 550W or greater system power supply (with a minimum 12V current rating of 38A) in 2 plugs. Another thing might be to lower speed of graphics card a little bit - who knows if they oc a bit.

@Skaria, nope Kolfrad's PSU specs. torben11, same graphics card or ?

To be 100% sure that it isn't a FL or CF problem, i have uploaded a copy of my Freelancer folder (working CF installation) and shared it with Kolfrad and Torben11.With working i mean on Windows 7 ultimate and GTX 580/660ti.

Kolfrad and Torben11: On the Options - Performance tab: do you a line saying 16-bit Dither Enabled/Disabled. This does not appear in 32-bit, that is.I think that there's more than 1 problem here. There usually are then things are this "strange", in my experience. DX9 download and Install is possible with Win7: Download DirectX Redist (June 2010) from Official Microsoft Download Center

I have some more ideas torben11 please upload Options/General picture 1. Is monitor connected only with DVI and original monitor cabel is used (if not please do that) ?2. Does keystroke CTRL + F12 or CTRL + T have any effect ( 3D commands ) ?3. SHIFT + F12 does nothing to the picture ? I just had a weird experience with my secondary pc (Asus Sabertooth Mobo and GTX 580). I have a OCZ 1 TB hybrid disk in that machine, which is slowing it down (the weird part). I started a new SP game and got the…

Think it's time for vendor support on this.Maybe even use Nvidia support at Support | NVIDIA

Kolfrad: I don't understand your MOBO.Notes for it is:*1-1 This motherboard is ready to support PCIe 3.0 SPEC. Functions will be available when using PCIe 3.0-compliant devices. Please refer to ASUS for updated details.*1-2 For PCIe 3.0 x16 (X8 mode), PCIEx8_2B(Grey) shares bandwidth with PCIEx8_2A(Red). Yet your GPU-Z is showing PCI-E 2.0x16 @ x16 1.1 (power save mode!) - If you start the rendering does those values increase (as they should to PCI-E 3.0x16/8 @ something ) ?Are there any recomm…

Is it like this one index.php?page=Thread&postID=323146#post323146 ?And which graphics card do you have ?

Did you edit flconfigdatabase.txt according to this thread index.php?page=Thread&threadID=23100 ?

Use wordpad instead, then it looks normal